Tool specific news: Company
Testwell CMT++/CMTJava
Testwell CTC++
CodeSentry
CodeSonar
Imagix
Events/Seminars
ALL NEWS
Embraer is using Testwell CTC++ to accompish the objectives of DO-178C DAL A
(São José dos Campo/Brazil, Offenburg/Germany, 3 November 2019)
"Testwell CTC++ automates the code instrumentation as well as the evaluation of the structural coverage results in a neat report. Thus the user sees where he has to increment our tests in order to cover the whole code base. Embraer has integrated Testwell CTC++ in the continuous verification flow", says Joao Carlos Davison, responsible for the elaboration of the software verification plan.
Mateus Lucas Alves Ferreira, product development engineer of Embraer expresses that Testwell CTC++ installation is straightforward and the tool usage is based on a command-line interface that is simple and easy to learn.
>Read full Customer Testimonial here
zepp.solutions uses Testwell CTC++ to fulfill the requirements of IEC 61508
(Delft/Netherlands, Offenburg, 10 May 2019)
"One of the requirements from IEC 61508 SIL 2 is to achieve 100% decision coverage. In order to verify this requirement, the coverage needs to be measured. We chose for Testwell CTC++ to do the job. (...) The flexibility of Testwell CTC++ allows it to be used not only for target tests, but also for host tests, as multiple compilers are easily supported."
>Read full Customer Testimonial here
Recorded Webinar: "Code Coverage for safety-critical embedded targets"
(Offenburg/ Germany, 8 May 2019)
Specialists from Verifysoft will take you through Testwell CTC++ to demonstrate how to face up to the challenges of ensuring Code Coverage:
- What is Code Coverage and why measure it?
- Code Coverage Levels and Safety Standards
- How to measure Code Coverage?
- Testwell CTC++ Test Coverage Analyse
- Tool Qualification for ISO 26262
- Platforms, Integrations and Customers
- The Code Coverage Solutions for Embedded Projects in Automotive Industry
Have a look at our recorded webinar here
You can also register to our next webinar
User Testimonial: Exonetik Canada chooses Testwell CTC++ for Aviation Sector
(Sherbrooke/Kanada, Offenburg, 9. April 2019)
Exonetik joins 600+ satisfied customer in 38 countries on all continents. >Read full Customer Testimonial here
“Testwell CTC++ generates clear and easy-to-analyze Code coverage reports”: New Testwell CTC++ customer testimonial from the automotive industry (NPP ITELMA LLC, Russia)
(Offenburg/Germany, Moscow/Russia, 20 March 2019)
In the process of software development, the company adheres to the V-cycle, which is the de facto standard in the automotive industry. One of the most important stages of the V-cycle is unit testing of software. Without a tool analyzing code coverage tests, it is difficult or even impossible to assess how fully the unit testing has been completed.
After trying many different tools for Code Coverage analyzation, NPP ITELMA selected Testwell CTC++. “It is very simple to use, and at the same time very fast and efficient”, says Mr. Dolozov.
In the following Customer Testimonial Mr. Dolozov explains the advantages of Testwell CTC++. "The tool generates clear and easy-to-analyze coverage reports and in addition, can be used to certify safety-critical projects, which is an important criterion for choosing a tool for automotive applications. With the help of Testwell CTC++, we found many uncovered sections of code and conditions".
“The missing tests were written in time, which allowed to detect many errors in the early stages of development. As a result, the overall quality of the firmware has improved significantly. The Testwell CTC++ tool thus took its honored place in our V-development cycle”. >Read full Customer Testimonial here